Test Panels

Results 1 - 7 of 7

Cracked Aluminum Blocks

Pressure code, section V & III, MIL-I-25135 and AMS-2644. The cracked aluminum block is made from SB-211 Type 2024 aluminum, rolled 3/8 inch thick...

Product details

Panel for Aqueous Developer

Aqueous developer check panel made from aluminum. Measures 3 x 10 inches. ASTM E-1417.

Product details

PSM-5 Test Panel

Sherwin Incorporated manufactures the "Penetrant System Monitoring Panel" to provide a quick means of determining the continued serviceability of...

Product details

Sherwin TWIN KDS Panels

A pair of nearly identical panels measuring 2 x 6 inches and 0.090 inch thick with matching crack patterns.

Product details

Sherwin Wash Test Panel WTP-1

A stainless steel panel measuring 4 x 6 inches and 0.090 inch thick with two parallel, "medium rough" strips, each 6 x 1 1/2 inches seperated by a...

Product details

Sherwin Wash Test Panel WTP-2

The 1.5 x 2 inch panel is made from 16 guage 301 or 302 stainless steel by grit blasting with 80 mesh aluminum oxide grit and 60 psi of air pressure.

Product details

Twin Nickel Chromium Sensitivity Panels

A set of two panels, each measuring 3.875 x 1.875 inches (100 x 35mm), sheared from the same stock with matching crack patterns.

Product details