General products diplayed here include:
• Fluorescent Penetrant Products
• Visible Penetrant Products
• Specialized Test Pieces, Accesories and Services
Water Washable Fluorescent Penetrants
| Level 1/2 | HM-1 - For relatively non-critical work. |
| Level 1 | HM-2D - Recommended for magnesium and aluminum casting with difficult surfaces. |
| HM-220 - Free rinsing; use on difficult surfaces. No petroleum distillates. | |
| WB-100 - Water-based; environmentally friendly. Also shipped as concentrate; user adds water. | |
| Level 2 | HM-3A - Versatile, general purpose material; used extensively on aluminum and magnesium castings; competitively priced. |
| HM-406 - Widely used in aerospace on magnesium, aluminum and titanium castings and extrusions. More sensitive than HM-3A. Also in spray cans. | |
| HM-412
- Similar to HM-406, only more sensitive. HM-420 - Free rinsing. Contains no petroleum distillates. |
|
| HM-602 - Resists over-washing. Contains no petroleum distillates. | |
| WB-200 - Water-based; environmentally friendly. Also shipped as concentrate; user adds water. | |
| Level 3 | HM-430 - High sensitivity; formulated for rough surfaces. |
| HM-604 - Widely used. Competitively priced. No petroleum distillates. Resists over-washing. | |
| HM-607 - Similar to HM-604 except slightly more sensitive. | |
| Level 4 | HM-704 - Ultra-high sensitivity. Used on smooth surfaces. No petroleum distillates. |
Nonwater-Washable Fluorescent Penetrants
| Level 1 | RC-29 - Competitively priced. |
| Level 2 | RC-50 - Widely used. |
| Level 3 | RC-65 - Also in spray cans. |
| Level 4 | RC-77 - Also in spray cans. |
| RC-88 - Ultra-high sensitivity; increases visibility of microscopic flaw indications. |
Emulsifiers for Fluorescent Penetrants - Methods B & D
| ER-85 - | Method B lipophilic, oil-based, used in post-emulsification processes. |
| ER-83A - | Method D hydrophilic, detergent-based, "non-aggressive," used after plain-water pre-rinse, recommended for use with RC-77 on highly critical rotating parts. |
Cleaners and Removers for Fluorescent Penetrants - Method C
| DR-60 - | Clear, non-chlorinated solvent for pre-cleaning and penetrant wipe-off. Also in spray cans. |
| DR-62 - | Similar to DR-60; evaporates more readily. Also in spray cans. |
| LA-1 - | Alkali-based, hot tank pre-cleaner. Replaces solvent-based pre-cleaners. |
Developers for Fluorescent Penetrants
| D-90G - | Dry powder, "form a," excellent surface cling. |
| D-100 - | Nonaqueous, "form d," alcohol suspension, spray application. Also available in spray cans. |
| D-106 - | Nonaqueous, "form d," similar to D-100, evaporates more readily; spray application. Also available in spray cans. |
| D-113G.1 - | Water soluble powder, "form b," normally used with nonwater-washable penetrants. |
| D-110A.1 - | Water suspendable powder, "form c." |
Visible Penetrants
| DP-40 - | Nonwater-washable, use with emulsifier or solvent wipe-off. Also in spray cans. |
| DP-51 - | Water-washable, remove with water or solvent. Also in spray cans. |
| DP-54 - | Water-washable, contains no petroleum distillates, more acceptable to sewage treatment facilities. Remove with water or solvent. |
| Hi-Temp K-017 - | Specially formulated and approved for high temperature applications, such as welds. Use with Hi-Temp K-019 Cleaner and with D-350 or D-100 Developers. Also in spray cans. |
| By-Lux - | Dual response: indications are red under normal light; orange under black light. Also in spray cans. |
Removers/Cleaners
| DR-60 - | Clear non-chlorinated solvent for pre-cleaning and penetrant wipe-off. Also in spray cans. |
| DR-62 - | Similar to DR-60; evaporates more readily. Also in spray cans. |
| Hi-Temp K-019 - | Foam cleaner especially formulated for use at high temperatures. Use with other Hi-Temp products. Also, use when wide, shallow cracks are suspected. Also in spray cans. |
Emulsifiers for Visible Penetrants
| ER-85 - | Method B, lipophilic, oil-based. Use with nonwater-washable penetrants. |
| ER-83A - | Method D, hydrophilic, detergent-based, "non-aggressive." Use after plain water pre-rinse to emulsify nonwater-washable penetrants. |
Developers for Visible Penetrants
|
D-100
-
|
Nonaqueous, "form d," alcohol suspension, spray application. Also available in spray cans. |
| D-106 - | Nonaqueous, "form d," similar to D-100, evaporates more readily; spray application. Also available in spray cans. |
| Hi-Temp D-350 - | Approved: use with other Hi-Temp products on heated surfaces. Also in spray cans. |
Also Available
Instruction Manual: "Visible Dye Penetrant Process: Spray Can Method"
- Spanish or English; complimentary, no obligation.
| Twin KDS Panels | Identical "Known Defect Standards" permitting the side-by-side comparison of penetrants and monitoring of penetrant system as required by ASTM E-1417. New product. Proprietary manufacturing process. Rugged; withstands daily use. Economical and reliable. |
| PSM-5 Penetrant System Monitor Panel | Industry standard, manufactured to Pratt-Whitney P/N TAM 146040 specifications. Use to satisfy MIL-STD-6866 and ASTM E-1417 requirements for daily system check. |
| Cracked Aluminum Blocks | "Penetrant Comparator" to meet ASME Boiler Pressure Code, Section V & III, and MIL-I-23135-C requirements. |
| WTP-1 Wash Test Panel | Use to satisfy removability test requirements. |
Laboratory Services
| In-Service Penetrant Tests | Periodic tests of in-use penetrants as required by MIL-STD-6866 and ASTM E-1417 - brightness, water content, viscosity, removability, sensitivity, and water tolerance. US Air Force approved laboratory. |
| Panel Recalibration | Refurbish, recalibrate, and certify compliance of in-service PSM-5 Test Panels. |
